Pneumatic system 12V VIAIR 150PSI Xtreme Duty Onboard Air System (10009)

PRODUCER: VIAIR   VIAIR’s X’treme Duty Onboard Air System is a pre-packaged compressed air solution that provides two 350C, 100% duty cycle compressors, a2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more. Please Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs. features – 2.0 Gallon VIAIR Air Tank – (2) 350C VIAIR Compressors w/Thermal Overload Protectors – 30ft. Coil Hose with Quick Connects – Tire Inflation Gun with 160 PSI Gauge – Dash Panel Gauge with ON/OFF Switch – 0-220 PSI Pressure Regulator – Blow Gun Air Tool – Sealed Pressure Switch (110 PSI on, 145 PSI off) – (2) 40-amp Relays – (2) T-Fittings (1/4” (M) x 1/4″ (F) x 1/8” (F)) – 1/4” Quick Connect Stud (F) – 1/4” Quick Connect Coupler (F) – 1/4” 175 PSI Safety Valve – 1/4” Drain Cock – (2) 1/8” BSP to 1/4” NPT – (4) 1/4” Compression Fittings  – 20ft. 12-Gauge Wire with Inline Fuse Holder  – 4” Strip of Continuous Grommet Material – Accessory Airline  – Electrical Connections specification – 12-Volt – Permanent Magnetic Motor – Duty Cycle: 100% @ 100 PSI – Max. Working Pressure: 150 PSI – Max. Amp Draw: 37 Amps – Ingress Protection Rating: IP67 – – – – – – – – – – – – –   PSI cfm A BAR lpm A 0 2.68 23 0 76.0 23 10 2.30 26 1.0 64.0 28 20 2.22 29 2.0 60.0 31 30 2.12 31 3.0 55.0 34 40 1.98 33 4.0 51.5 35 50 1.87 34 5.0 48.0 36 60 1.80 35 6.0 45.5 37 70 1.73 35 7.0 43.0 37 80 1.66 36 8.0 40.0 37 90 1.56 36 9.0 36.0 37 100 1.52 37 10.0 31.5 37 110 1.45 37       120 1.38 37       130 1.27 37       140 1.17 37       150 1.06 37       * Supply Voltage: 13.8 Volts   2.0 GALLON TANK fill rate 0 to 145 PSI 1 min. 40 sec. (± 05 sec.) 110 to 145 PSI 32 sec. (± 03 sec.) 35″ X 12.5″ fill rate 0 to 30 PSI 4 min. 40 sec. (± 10 sec.) 15 to 30 PSI 2 min. 20 sec. (± 05 sec.) 37″ X 12.5″ fill rate 0 to 30 PSI 5 min. 00 sec. (± 15 sec.) 15 to 30 PSI 2 min. 40 sec. (± 10 sec.)